Monkey Harriers

I picked up a Monkey Ball GDRom on the shmups forum recently (thanks fuko!). Normally this requires the expensive "banana panel", but given I have a Planet Harriers cab with analog stick, I figured it should be compatible - not to mention a lot less phallic than a banana stick.

Swapping out the Hikaru for a Naomi GD was no problem at all, everything hooked right up perfectly! Booted up the game, calibrated the analog stick, and gave it a spin, only to find the vertical axis (up/down) on the analog stick was reversed. Not sure why Planet Harriers analog controls would be any different than other Sega games, but hacking some disconnects for the vertical pot and swapping the wires around solved it quickly.
    
Obviously Planet Harriers is a much better game, so I won't be keeping Monkey Ball in there for long, but it does make for a nice change of pace, and I have always wanted to play the original arcade version of Monkey Ball. :) It's also fitting that both games were developed by Sega's AV division.

Cabinet Linking: Gundam DX (Naomi)

As mentioned in a previous blog post, I never had much interest in Gundam anime or games, but some cool mecha shmups are slowly turning me. After seeing Gundam v.s. Gundam Next in a 4 linked cabinet configuration at Game Center Arcade, I became much more interested in how this particular series plays.

As most Naomi collectors probably know, "Mobile Suit Gundam - Federation VS Zeon DX" on GDRom is one of the cheapest titles you can get for the platform, and gets boring pretty quickly, hence the cheap price. But how does this series continue to exist, and garner such excitement in Japan? Well it seem multiplayer is what really makes this game fun, and being such an arcade hardware geek, I decided to see if I could link two of my own cabinets together for some Gundam action!

Now, I already owned a copy of Gundam DX (like pretty much everyone), and I also have a pair of Naomi GDRom setups, so what I needed to buy first was a second copy of the game. No biggie, it was only $20 on eBay.

Next I needed the all important "communications board". This sits in-between the GDRom DIMM board and the motherboard. I seriously don't understand why the Naomi motherboard has fiber optic connections, yet requires this extra communications board to actually work. Anyway, you'll need two of these boards, and two fiber cables to link the motherboards together.

Checking the brilliant Sega-Naomi website, you'll find the bios list mentions you need EPR-21576F or greater to link Naomi cabinets. I happened to have the latest JPN H bios in two mother boards. Note: you do not need the Network version of the DIMM board to make this work!

Next is the dreaded part of hooking a Naomi system up to a standard jamma Astro City. Needless to say its quite painful to get all the parts required to make this happen, but you should have no problem finding everything on eBay.

My New Astro City has the same power supply as a Blast City, and I also have Naomi cables for this bad boy allowing me to run a Naomi motherboard directly without need for a second power supply or audio amplifier. My original Astro City is not as lucky, so I had to run the entire lot with Sega Power supply, Sega Amplifer with sound pot, etc. Of course both require a JVS to Jamma I/O converter.

The resulting mess, is something that would take a lot of work squeezing inside the cabinets, so I just left them outside for now.

At this point, powering up both systems, with the fiber optic cables hooked up, would do nothing more than run both games independently. You need to go into the game configuration, and set the networking assignment to "Master" on one, and "Slave" on the other. "Max Operations" and "Side Select" are used if you still want people to be able to play independently of each other, and choose which side of the battle they wish to be on. I just left these to their defaults since I wanted cooperative play.

Now after restarting both systems, you should get a message saying its checking the network, and after 5-10 seconds of this blinking message, they should show they are linked, and the games should start in parallel.
    
Now all I need is to invite a few friends over and convince them to play this game instead of some shmups. This is probably the most difficult part of the experiment.

    

Mecha shmups

I've never been a huge fan of Gundam type mecha games (or anime for that matter), but these two high class mecha shmups are quickly winning me over with their incredible soundtracks, and highly detailed hand pixeled renderings.

First up is Rohga Armor Force by Data East (also known as Wolf Fang in Japan). The international version is equivalent to the "special mode" of Wolf Fang (if you hold down buttons 1 and 3 while pressing start on Wolf Fang). Special mode cuts out the story line elements between stages (there is still story chatter at the beginning and ending of each stage), and combines all 4 branching paths to an unabridged 12 mission marathon.

Completing Rogha/Wolf Fang with a single credit is a herculean feat, as the 12 consecutive stages will run you about 60 minutes!

Next up is Cybattler by Jaleco. A vertical mecha shmup, and primary inspiration for Grev's latest (last?) shmup for NESiCAxLive arcade platform and XB360 - Strania.

Jaleco wasn't typically known for releasing very detailed or high quality titles, but they really put everything behind this game. The soundtrack is outstanding, boss designs are innovative, and mecha control scheme quite intuitive with a two button shot/sword and strafe while holding either button down. I'll reserve final judgement until I spend more time with it, but needless to say its quite difficult as I couldn't get past stage 2 boss without a lot of practice.

The Shmupmeet

The underground arcade fighting scene has made a magnificent comeback in recent years, with local tournaments featured in bars, hotel conference rooms, and a handful of arcades left in existence, ultimately leading to a final showdown in Las Vegas (EVO).

The above picture may look just like one of these fighting events, except its not. These people are not crowding around opponents beating each other to a bloody pulp, or trash talking one another with gripes about button mashing or forbidden combo hacks. These people are playing "shmups". Yes shmups, that ugly word used to describe the genesis of arcade games, the shoot-em-up. One ship against an armada of invading enemy. They shoot, you dodge, you shoot back. Simple in principle, yet amazingly satisfying.


Modern shmups have evolved quite a long ways from the original Space Invaders of the late 70s. In fact they've more accurately mutated into a sub-species of score based challenge that have nearly caused their own extinction, save for a very few die-hard obsessed fans. With only a few companies left today making shmups for arcade and console, its hard to believe anyone much cares about the genre, but these dark grainy cellphone pictures you are seeing here show there is still an active underground following, and not just in the SF Bay Area, but around the world [see videos included at the end of this post].


Will shmups one day be lifted from its cult following to be recognized as a legitimate tournament sport like fighting games have? Unlikely, as score based single player games typically don't fair well in tournament style events. Although I've been successful in the past running shmupmeet challenges, its not anything like the Player vs Player excitement of a spectator's sport. Still, there are a few hybrid style fighting-shmups, and other interesting ways to pit two players against each other in a normally co-operative shmup, which make for some great smack talk and elbow jabbing between opponents.







More shmupmeet videos on youtube here.

February GETs

I've started picking up a few PCBs again. This time I'm filling in the gaps in my collection with ones I've passed over before, or in the case of Shikigami No Shiro, buy back something I had previously sold. With all of these being cheaper than typical XB360 games, its was hard to pass up.

Shiki and Raystorm are games I consider my least favorite of their respective series, but I'm surprised to be digging Raystorm's atmosphere (mostly because of the Zuntana BGM).

I'm also gaining an affinity for older Visco shmups.

Plus Alpha (Jaleco)

While not one of the best shmups that came out in 1989, this rare Jaleco "cute'em-up" sports some nice pixel art, and challenging boss battles (mostly due to the huge hitbox).

The Jaleco Mega System 1-A hardware slows down quite a bit when there are a lot of sprites on the screen, giving a little breathing room for tight dodging, but I don't think that was intentional (ala Cave).



Between stages, there is an interesting slot machine challenge for obtaining shot power-ups, bombs (they call hypers), and 1ups.

Thanks to robivy64 for letting this PCB escape his collection. :)

Dodonpachi Daifukkatsu X360

I got this yesterday morning, and my eyeballs have been bleeding all different kinds of colors ever since. Cave really pushed this game to the visual limit, and made the Xbox 360 port fun with extra modes. A definite buy of any fan, regardless if you own the PCB or not.

I'm really looking forward to the special package version of DFK BL + Ketsui BL in February.

More D9200 neckboard problems

The Wells-Gardner D9200 continues to be a source of problems for me, despite the neckboards being modified per this service bulletin. Its no wonder these monitor chassis were recalled a long time ago.

You may remember me fixing this issue before when some of the colors would randomly stop and start working. But this time, rather than loosing colors, the Red gun seemed to be stuck on at 100% and wash out the other colors. I confirmed this by going into the digital controls and trying to lower Red to no effect.

Following the neckboard schematics I visually traced the Red signal pathway through the components, and spotted this bulging/blown transistor at Q203.

According to the schematic, Q203, which is a KSP2222A transistor, is what limits the Red signal, so I'm sure its the culprit in this problem. I placed an order with Mouser Electronics for a bunch of these, and a few more NTE2501's just in case. :)

[11/17/10 Update] Well that didn't fix it, so back to troubleshooting. :( [/update]

Great Mahou Daisakusen item collection

I may not be great at item collections in Dimahoo / Great Mahou Daisakusen, but at least I was able to complete this full art set. :)



(With special thanks to Mikhail, Tom, and Laurent for helping me obtain a few of these pieces.)

Hacking the MGCD (Part 2)

The Dreamcast version of the MGCD has a similar issue to the PS2 version, of not being exactly JAMMA plug-in play. The last two edge pins on either side of the connector are mapped to joystick buttons rather than grounds (per the JAMMA spec). If these are grounded when you power up the MGCD, it will not accept any inputs from the joystick or other buttons, which is a pretty bad design flaw. So like the PS2 MGCD in Part 1, a simple adapter is needed to isolate these from the edge connector. If you actually need to use buttons 5 & 6 from both players, you can manually connect wires to the adapter and run them up to your control panel.

Above we have the MGCD, with edge adapter, mounted to a Dreamcast, and ready to be connected to any 15khz JAMMA cabinet. I should mention that the same hack used to disable the timer overlay on the PS2 version also works on the Dreamcast version. Also note this MGCD comes with an extra cable to attach a DC memory unit.

If you are like me, you relish the fact that the Dreamcast can output high resolution (31khz/VGA) natively, and I happen to have some JVS/JAMMA cabinets with tri-sync monitors. So you might think that simply using a DC-VGA adapater in place of the MGCD AV cable would work. Unfortunately its not that easy. The MGCD seems to stop working if there is no input video sync present at the MGCD AV connector. So a small hack is required to the DC-VGA box.



Shown above is my DC VGA box, which has its Composite Video Output connector modified to also be connected to composite sync, which is pin #10 on the Dreamcast AV input cable. You do not need to disconnect composite video pin #13, having both connected to the RCA jack at the same time will work fine. The blue video sync plug, shown above, is then soldered directly to the MGCD AV connector input pins (as shown below), along with Left and Right sound outputs from the VGA box.




So now I have a choice of using the MGCD amplified mono sound out of the PCB, or using the DC-VGA box's stereo headphone output if my cab has its own stereo amplifier. BTW: only the "Madness Gameware" or "DC Blaze VGA" box has headphone output and volume controls.

Lastly, you may have noticed a toggle switch on my Madness Gameware VGA box, this is a non-related hack I wrote about back in 2002 to force it into either 15khz RGB or 31khz VGA output. This is not needed for the MGCD, since you can get great 15khz RGB output by using the original MGCD AV cable.



So, below is the completed MGCD with Dreamcast VGA and stereo output connectors ready to go on a JVS/JAMMA cab.

Bakraid Love

(With special thanks to Seth and Paul for helping me obtain a few of these lovely pieces!)

Hacking the MGCD (Part 1)

The MGCD is a console to JAMMA converter created by Taiwanese company Frolicker, and distributed by many Taiwanese arcade resellers. Several versions of the MGCD were produced for Dreamcast, Playstation2, Gamecube, and Xbox. What makes the MGCD unique to other pay-to-play console timer PCBs, was the MGCD could be programed to recognize the start game screen of a particular title, as well as the end game screen, allowing it to disable all input, sound, and even video, until the game was fully loaded and start game screen ready. So in a sense, the MGCD could disguise the fact that you were playing the console version of an arcade game. Here is the manual for the MGCD-B Version, showing all the nifty features and settings.

For a pretty stupid reason, the MGCD isn't exactly plug and play with most JAMMA setups. The problem is in the fact that the MGCD maps 12 player action buttons to the jamma finger board, utilizing the last 2 pins on each side, which are typically tied to ground on most JAMMA looms. If these connections are tied to ground, the MGCD will not boot up properly, and simply not work. To get around this, you must either modify your JAMMA loom connector of your cabinet, detaching the ground wires to these last pins, and connecting them to player buttons 5 & 6, or just leave them off completely. So instead of modifying my cabinet, I just created a fingerboard which lifts these last two pins on each side, allowing me to play on any JAMMA cab. If I wanted to use these last two buttons for fighting games, I could simply run a wire to the fingerboard up to the control panel.


Leave the last two pins on either side disconnected.

Similar to other pay-for-play "timer" PCBs, the MGCD can also play credits for time, although with an annoying timer countdown that is displayed once per minute at the bottom of the screen. With the limited number of games recognized by the MGCD firmware, the timer feature is primarily used by most people, where you can setup a single credit to play for a maximum of 256 minutes. The problem, of course, is that that annoying time displayed at the bottom of the screen.



Figuring out how to remove the timer overlay took some trial and error. At first I tried re-routing the RGB video signal from the console output, directly to the front of the fingerboard. This did work, but the signal was unamplified, and too dark/weak to be displayed on an arcade monitor. So the only other option was to figure out which chip on the MGCD was doing the video overlay, and disabling it. This took a lot of probing around, but eventually I found the chip, and grounded one of the legs to effectively disable it.


Video timer overlay chip highlighted in red.



Connecting these two pins (highlighted in red) will disable the video timer overlay.


Now here is what the output looks like without the timer.



Finally, here is the MGCD installed on my PS2, and ready to be played on any JAMMA machine.




Next, I'll talk about how to take the MGCD Dreamcast version and hook it up to a cabinet at either 15khz or 31khz. (Go to Part 2 here!)

Ketsui: PCB v.s. XB360 port

I was lucky to buy Ketsui back in early 2005 while the hype (and monetary value) was still at a relative low point. Since then, the game had grown into legend with the failed Arika PS2 port and superplay debacle, failed Mame dump attempt, soaring PCB prices, and DS mini-game version giving only a glimpse of this classic Cave style play.

With the recently released 5pb port of the game on Xbox 360, now those who typically trolled the forums with angst towards PCB owners are finally getting their own taste of the game, and realizing it may have been worth the hype as one of Cave's top produced games this decade.

So how does the port stack up against the PCB? Lets find out.


At a recent Bay Area shmupmeet, a side-by-side comparison was setup for participants to judge for themselves. In an attempt to level the playing field, two identical arcade cabinets were used with sanwa arcade controls and tri-sync arcade monitors. The original PCB runs natively at 15khz video resolution, while the XB360's lowest setting 640x480 resolution was used. Obvious differences in the graphical look were apparent, but most participants didn't much mind the XB360 scaled graphics, which were helped by various filters used to reduce the blockiness. A noticable lack of formal HD graphics, and no scanline display options in the 5pb port pailed in comparison to the previous two Cave ports (Mushihemesama Futari, and Espgaluda II). Its arguable that external scaling hardware could be used to restore a 15khz display with native scanlines, although this would not be considered "pixel perfect" by purists. The only Cave ports that have "pixel perfect" bestowed upon them are Arika's PS2 Espgaluda and PS2 DoDonPachi Dai-Ou-Jou, which both run at a native 15khz (non-interlaced).



From this distance, both PCB and port look identical (despite a slight color variation in the monitors), but the game speed was noticeably different.


The next noticeable difference when playing the port was the game speed, which felt slightly faster than the original PCB. Again another compromise when porting a low resolution arcade game to a modern console that displays on consumer LCD screens and television sets. Does this really effect the playability of the port? Certainly not. But rest assured, console players will be quick to point out that they are playing at a slight disadvantage to the PCB.

Lastly, the sound, which normally a port should exceed the PCB, given it can play in stereo and with newly arranged soundtracks, but unfortunately the port being based on the last Ketsui rom fix, includes the slightly louder lock-on sound, which can be quite annoying if you are used to the original PCB rom. Of course with the fixed roms comes no chance of the game crashing during the demo sequence, which I've never personally witnessed on my PCB since I don't use freeplay settings.



So what makes the port better than the PCB?


Being an order of magnitude cheaper than the cost of the PCB is certainly a bonus, but the port has many advantages over the PCB which can't be denied. First and foremost is an all new arrange mode, which takes bullet canceling in Ketsui to a new level. I haven't spent much time with this mode yet, but it certainly looks fun, despite it not being created by IKD/Cave.

Next on my list would have to be the ability to practice individual levels, without which progress for me on the PCB has been quite slow. Being able to practice Stage 4 and 5 the past two days has been a great time saver, not to mention much more pleasurable without making those minor mistakes in the first 3 stages which prevent you from having a high scoring run. Something lacking, is the ability to practice individual bosses, which seems odd given this has been a standard in almost every other Cave port to date.

Last are typical XB360 port features such as arrange soundtrack, online leaderboards with downloadable replays, gamer icons, and wallpapers, all which don't interest me much to be honest. The replays are a nice tool to help see how others approach the game, but there have been plenty of Ketsui superplays/DVDs available before now, its really only worth watching if someone exceeds these previous records.

In Summary, the port is definitely worth owning, and all who played it at the shmupmeet thought it was faithful to the PCB (ignoring the slight speed difference). Unfortunately, 5pb's effort pales in comparison to previous Cave ports in terms of features, modes, and settings. This may be due to the high amount of pressure to release the game on time, and bug free, unlike their failed Dai-Ou-Jou 360 attempt. The question now remains if the port sufficiently bursts the hype bubble around the PCB to deflate its value to any significant degree. Given the largely positive feedback I've read on the forums, I think this may take longer than expected due to a now wider acknowledgment that Ketsui is indeed one of Cave's finest.

April GETs

Keeping with the Milestone theme, I picked up these two Naomi GDRoms relatively cheaply. Not your typical style shooters, Milestone shmups favor function over form with complicated scoring mechanics and simple cell shaded artwork. Maybe its the need for variety over Cave danmaku, but I'm finding these games refreshing. The catchy techno soundtracks also help to hold my interest.